Відео

Rodriguez Amy Lee Robert Lee William

What does the silicone and soap actually do in this process? I have never come across that idea before. They can not cool the drill bit, the drill will go through the stone just as fast if you don’t use it, but oils or lubricants are widely used when drilling in metal. Never heard it used on stone. So I would love to hear the cold hard scientific facts of why you use it. When it comes to glass or plastic container, you can use a piece of wood at the bottom to hold your stone against. It won’t rattle and you’ll avoid drilling a hole into the plastic. 😂 To newbies, it can actually be a good idea to drill not all the way through, and start from the other side so the two holes meet in the middle. By drilling through only one way you can get a blow out, meaning a part of the rock cracks and falls off around the hole as you reach the other side. If you hold the stone in your hand, a sign that it is about to go to hell, is when you see black particles come up from the hole. It means things are too hot and you are about to destroy the stone and your drill bit. That is why many like to have it submerged under water. You also avoid inhaling a lot of stone dust if you have it submerged. Stone dust can consist of some really terrible stuff that shortens your life, gives you severe lung diseases and gives you cancer. So protect your lungs. Also: ALWAYS use protective glasses unless you don’t mind becoming blind. Stone bits and pieces and diamond particles can come flying by, right into your eye. Protective glasses is so cheap. Eye surgery isn’t.

Thanks for reviewing this guitar. I have ordered the identical one. Wasn’t sure if one could split the coils in the pickups

Dude - lmao

What have you found best to clean your airbrush after spraying True Oil? Thanks! Oh yeah super great video!! I have been refinishing old gun stocks but never thought to use air brush and your tricks with compound wax!! Big Help!!

Pickups can make a world of difference. My first guitar was a cheap Silvertone Strat copy. Years later I replaced the cheap electronics and put in some Tonerider Classic Blues and the guitar sounds fantastic. 20+ years later and the guitar still gets regular use along with my expensive Fenders.

I just bought this guitar. Same color and everything!

Im trying to use Tru-oil on making 🖊️ and you just taught me something thanks

Great just give me new ideas 💡

They’re essentially the older American standard pickups round slightly hotter. Suitable for any Strat.

I bought this same guitar and the switch was broke.i never tried playing it again.its still in the case a year later.the guitar is nice but everything else on it is junk I thought.i got a prs coming.after 19 200$ guitars I'm done.im buying a prs.should have done that along time ago

I have the Urban. Change the strings and sounds so much better.

You from Oregon? I just bought a white one of these should be here on Thursday. Never had a brand new in the box guitar before, I’m pretty excited. I actually did buy a new in box bass once but that doesn’t count lol

I messaged you on Facebook, if this is available I would love to buy it.

Your video actually gave me the confidence to drill my first agat and it was a sussed thank you so much for explaining it in a simple straight forward was redneck and rock hound? Sounds like we are birds of a feather happy hounding!

I put a Tex mex loaded pickguard in a squier classic vibe and was happy with the change. But I also changed to fender branded tremolo . It’s not as good as my American Strat but it closed the gap.If your on a budget like most of us try adjusting your pickup height you may find the tone your looking for for free, and who doesn’t like free 👍

Great video

Thanks for sharing. I do love your method and I have seen quite a few, but yours is well explained and the process looks quite doable. Thanks again.

coolness, thanks dude !

What does it weigh?

I love the Jackson JS11! I bought one for my office because it was the least expensive guitar I found. Loved it so much, I bought three more; planning on getting another two in the near future. They make great guitars for repainting because the black hardware looks good with any color.

Would you drill 2 small holes on my small (20mm) Druzes so I can make into jewelry ? I have 25 druzes

I have this same guitar, everything worked good (even the cable 🤗). The only thing I did was check the setup and I wax potted the pickups and shielded the cavities and changed the strings thats it.

I bought this guitar it'll be here Monday. Haters gonna hate. But for 150 I'll take a chance. Besides I can do my own setups and even if I had to pay for it at 150 plus 100 for a setup. Good deal. Really good deal. This guitar is full thickness and 22 frets, rolled fingerbored the pickups sound fine to me just as good as any cheap guitar I've ever heard and better than most Imo. Plus a push pull split humbucker? Really? I don't care at all about the amp and you did the right thing by not using it. It's not going to do any guitar justice. If it tunes up nice and intonates I'll keep it. Got my fingers crossed.

I would say the Squier are better than Fender. ❤️🎸.

Expert level drilling a stone! Nice one! Saw a lapidary with a lot more equipment drill a hole and your technique actually looks much better! Kudos for sharing.

Awesome review, Thank you! Just bought this guitar.

Sounds like crap

I just ordered a set of Tex-Mexs for my Carlo Robelli.

Great review.....the way you reviewed them was excellent. Bootstrap should have you demo each of their pickup sets just as you did these.

Thank you for sharing

Really like this. I have this guitar. Need to learn how to solder.

Nice demo...off to a good start, ...until @2:45 >

As long as you got a good body, neck ,literally everything else can be upgraded to the Max and have a sweet guitar. I need a guy named Stewart Dowling that won a guitar competition in Pittsburg on Sears and Roebuck guitar,so,ya

This guitar is still one of my favorite IYV's of the 9 I own. IYV Semi Hollow's are great deals, but my favorite is an IYV SG copy, which is a banger. Great video.

Great review of a great guitar.👍🎸 You make me want to learn to play guitar.

Cool video. I subscribed. Your attitude is great. You are on your way to shredding. I'm considering getting this guitar for the wammy bar and price.

Sounds like some has PRS blindness. I have that exact model and i couldn't be happier. PRS is just a name. IYV makes OEM products for a lot of the big guys. Im sure PRS is one. Not to mention that virtually all guitars are made with CNCs that are made in china. PRS is no different. Check out PRS, most are made in china, Vietnam, Korea or Indonesia . Keep over paying for PRS, Gibson and Fender. All of them are rip offs. Just taking your money by putting their logo on stuff built by IYV, Censtar, or any number of Chinese manufacturers.

Hey mate. Great video. Very helpful. Do you know the part number of the headphone jack. Mine broken. I've removed it but can't find the one to buy

Would you recommend this to someone as their first guitar? Been shopping around for a beginner guitar to learn to play!

That finish is beyond amazing and it sounds great!

Really helpful! Thank you!

What size are the tuners? I dont know if thats a stupid question I dont really know what I'm doing

Thanks for sharing. Very helpful and informative, Seajay.

The vegetable glycerine U can find in the baking aisle of your supermarket, cheers Graham

I have a copy of the specs on the pickup sizes Denny , Polepiece spacing: the neck is 50mm (1-31/32 inch), the bridge is 52mm (2-3/64 inch), mounting screw holes distance: 78mm (3-5/64 inch) Resistance (neck/bridge): 7.8K/16.6K, tolerance: 0.5K; magnet: Alnico 5; nickel silver base plate; PC bobbin; a row of adjustable screws; wiring: 4P Shield Package includes: neck & bridge pickups set and mounting accessories. Note: Our screws maybe will not fit your usage, please use your own if you can

I bought my IYV IP350 and got using my Amazon gift card final cost w/tax 37.10, it's a fantastic guitar. I've always liked humbuckers but the one thing I want to change on my IYV are the pickups, there just to bland for my style. I saw some on Amazon that fit a Les Paul or 335 the bridge is 16.6K neck 7.8, Will they fit the IYV without having to mess with modifying the pick up opening?

Do you know if the DLX Plus models are routed for HSS?

Would a Dremel or Dremel knock off wirk for this as well ?

Use wood under the water as your base